WindowAlert UV Liquid

Description

WindowAlert UV Liquid is designed to fill in the gaps between our decals on windows–providing complete window protection.

Each year, hundreds of millions of songbirds perish as a result of window strikes in America. Now, you can be part of the solution. After two years of chemical engineering, WindowAlert announces the ultimate product–UV Liquid.

WindowAlert decals catch the attention of birds. UV Liquid completes the visual barrier.

UV Liquid is easy to apply. Simply use our included sponge “bingo marker” to make dots or lines on window glass. The dots or lines dry to virtually clear, last four months, and are easy to remove. And, they save songbirds!

• CONTENTS: 1 oz. Bottle of UV Liquid
• Sponge applicator top for easy application

Application Instructions

1. Before applying, think about a pattern. Dots or lines 4″ apart is best for optimal visual performance.
2. WindowAlert UV Liquid may be used only on an exterior glass surface that is free of any overlay, tinting, film, or coating.
3. Apply UV Liquid when glass is cool to the touch (early morning, overcast, shade, etc.).
4. Cool conditions allow UV Liquid to slowly dry to clear.
5. Clean glass thoroughly. Make sure glass is free of chemicals and cleaners before applying decals.
6. Invert the bottle and press the felt tip against a cloth towel to break the seal behind the felt tip. You will hear a click.
7. Very gently touch UV Liquid marker to the glass, forming a dot the size of a dime. To avoid dripping, do not touch too hard and do not squeeze the bottle.
8. Attempt to create a “visual barrier” across the glass surfaces. Apply WindowAlert decals. Then, apply UV Liquid to areas between the decals.

   For optimal protection, scientific studies suggest placing decals and/or UV Liquid dots four inches horizontal by two inches vertical from one another.

Removal Instructions

1. Remove UV Liquid in warm weather (midday, direct sun, etc.). The hotter the glass, the better.
2. Liberally apply ammonia-based window cleaner to glass. Allow it to soak for a minute or more. Then, remove UV Liquid with an absorbent cloth or sponge.